The Turbo File II is a Professional Electric File designed for professional nail
technicians. It is designed for use on natural nails, acrylic nails, sculptured
nails, wraps, gels and for pedicures.

1. Forward/Reverse Switch- Pressing switch (fig. A) to “F”, spins the Bit
clockwise. Pressing the switch to “R” spins the Bit counter clockwise.

2. Variable Speed Control- Increase speed by turning the Speed Control Dial
(fig. B) clockwise up to a maximum of 20,000 RPM. To decrease speed, turn
Speed Control Dial counter clockwise.

3. Twist Locking Chuck- The Turbo File II chuck (fig. C) holds all standard
3/32” Bits. It has a twist locking chuck that secures the bit when locked. To
open the chuck, twist the center locking sleeve to the “open’ direction marked
on the hand piece. To close the chuck, twist the center locking sleeve to the
“closed’ direction marked on the hand piece. No tools are required.

4. On/Off Switch- Turn machine off and on by placing the switch in the
center position (fig. A).

5. Turbo File II Hand Piece Cradle- When not in use, place the hand piece
in the built-in hand piece cradle (fig. D). Never place the Turbo File II in the
cradle when the machine is on and spinning.

6. 110V-240V Option- The Power Transformer is a 110V-240V plug transformer.
To use this in countries other than the USA and plug sockets other
than the normal 110v, insert the plug transformer into a “Plug Adapter” (not
included) designed for use in that country or for that power output and make
sure that the power output is between 110v and 240v. If it is not, do not plug
the machine into the power outlet. Power Transformer and Plug Adapter
should be plugged into the power outlet and then into the power plug socket
on the back of the machine.